The NC Series stainless steel submersible pumps from Proactive are suitable for dedicated or non-dedicated groundwater monitoring applications in 2" wells where a simple sampling pump is desired. Three models are available which offer lifts of up to 100 feet (30m)*.
These pumps offer a simple solution when the project requires equipment which can be decontaminated. Their simple design offers reliable, long lasting service for groundwater monitoring or long term remediation, even is harsh conditions, with the convenience of the replaceable motor module.
This pump is capable of pumping up to 80 feet from ground level by simply connecting it to the PA-10600 (Power Booster 1 Controller) or PA-10650 (Low Flow with Power Booster 1 Controller), then connecting the controller's positive and negative alligator clamps to the 12 volt battery.
The engineered plastic WSP-12V-ND70 pump is capable of pumping up to to 70 feet from ground level by simply connecting it to a 12 volt battery. Its reliable design is suitable for continuous sampling and purging of groundwater wells.
This pump is capable of pumping up to 25 feet from ground level by simply connecting it to a 12 volt battery. Its reliable design is suitable for continuous sampling and purging of groundwater wells.
The Waterra PowerPump-2 is the most powerful pump actuator manufactured by Waterra. A Honda GX100, 3 horsepower, 4 stroke, gasoline motor powers this device.
This actuator generates a 6 inch stroke and can operate both the Standard Flow System and High Flow System to their maximum effective depths. The PowerPump 2 weighs 70 pounds and usually requires two people to carry it.
The Waterra PowerPack PP1 provides the mechanical actuation for pumping with inertial pumps to depths of over 60m, in a fully portable, single operator power unit. At 13 kg, the PowerPack PP1 provides outstanding pumping performance.
The PP1 is powerful enough to lift water from over 60m depth using the Standard Flow System, and is so compact that it fits onto a back-pack frame. The PowerPack PP1 incorporates clamps for Waterra High Flow and Standard tubing sizes (adaptors are available for smaller tubes).
A Honda GX-25 series, 1.0 horsepower, 4 stroke, gasoline motor powers this device, which can run for approximately 1 hour without refuelling.
PP1/BP ó PowerPack PP1 including backpack and spark arrestor
The Waterra Hydrolift II is a portable, electrically operated device that is used to automate the operation of the Inertial Pump. The Hydrolift is powered by a 3/4 horsepower electric motor (available in either 110 volt or 220 volt) and generates a 4 inch stroke at up to 200 cycles per minute. This actuator can operate the Standard Flow System up to its maximum effective depth and will operate the High Flow System up to a depth of 150 feet.
The Hydrolift weighs 35 pounds and requires an electrical power supply of at least 1000 watts. This actuator is the ideal choice for the frequent user of the Inertial Pumping System with moderate to extreme pumping requirements.
Key features
Waterra distributes the Pegasus Alexis Peristaltic Pump, a self contained sampling station that includes all the best features of these devices.
Packaged in the rugged Pelicanô 1430 case and incorporating its own power supply and charger, this pump will keep you sampling in the field all day long.
BEST PUMP HEAD
The Masterflex EasyLoad II pump head is the best available ñ especially for environmental work. The peristaltic tubing is simply placed into the pump head channel and the head is then closed by moving the lever over to the opposite position. Next, sample tubing is attached to the peristaltic tube and the unit may be turned on.
The Spectra Field-Pro is a state-of-the-art peristaltic pump that features a heavy-duty, all-inclusive design. This means no external cables,chargers or batteries to worry about.
BUILT FOR FIELD USE
Weighing in at 29lbs/13 kg (including the battery), the Spectra Field-Proís powder coated aluminum case has heavy duty latches, hinges and handle.
The case has a built in storage compartment which can hold a field book as well as the two power cables that come with the Field-Pro. The case also incorporates a stand for sample bottles. A rubber gasket around the inside of the case lid helps keep the elements out while it is closed.
BEST PUMP HEAD
The Masterflex EasyLoad II pump head is the best available ñ especially for environmental work. The peristaltic tubing is simply placed into the pump head channel and the head is then closed by moving the lever over to the opposite position. Next, sample tubing is attached to the peristaltic tube and the unit may be turned on
The Waterra Lever Pump is a manual lever designed to provide operators with a convenient, portable mechanism which would provide some mechanical advantage when manually operating the Inertial Pump as well as facilitating the collection of samples with this system.
This actuator will fasten onto most above ground well completions quickly and easily. The tubing clamp is designed to accept Standard Flow, High Flow and Low Flow tubing and the handle is adjustable in order to accommodate various casing diameters and desired stroke lengths.
The Lever Pump weighs approximately 8 pounds